|
| |
TM 10-5430-242-12&P
0020 00
0020 00-3
CAUTION
Keep the disk halves together when removing from the valve body. Disk halves
must be grasped firmly when disassembled from the valve body. Dropping the
disk halves off the disk riser can damage the sealing surfaces. As the discs clear
the slots in the valve body, hold them together with the right hand in order to avoid
dropping off the disk stem and damaging the sealing surface.
6. Lift bonnet (5) with valve stem (3), disk riser (12), and disk halves (13) and (14) from valve body (11).
7. Remove bonnet gasket (15) from valve body (11).
8. Rotate disk riser (12) counterclockwise, and disassemble disk riser (12) from valve stem (3).
3
14
11
1
2
4
7
6
16
10
9
5
12
13
15
8
|
