CRATING INSTRUCTIONS - TM-10-5430-239-12-P0166

TM 10-5430-239-12&P

0031 00

NOTE

Contact unit/local safety office for disposal of fuel tank cleaning residue.

8. Drain the detergent solution from the tank.

9. Flush the tank with clear water.

10. Air-dry the tank.

11. Install the filler/discharge assembly on the tank (WP 0020).

NOTE

All fittings attached to the tank must be wrapped prior to folding using

cushioning materials provided with the tank.

12. Install the dust caps on the flanged adapters of the filler/discharge assemblies.

13. Brush off all debris clinging to the fabric material of the tank.

14. Apply technical TALC (Item 12, WP 0041 00) to the tank exterior.

15. Fold the tank from the sides towards the middle.

16. Roll the tank from the end opposite the drain fitting.

17. Plug the exposed hose assembly openings with suitable, clean materials.

CRATING INSTRUCTIONS

1. Make sure the tank has been properly folded (WP 0005 00).

CAUTION

Use care when packing the tank. The tank will be easily damaged by tools,

packing box nails or other sharp objects.

2. Pack the tank in a close-fitting box or container. When the tank is disassembled and refolded, it is to

be replaced in the original box or container.

3. Each tank is provided with suitable packing around the tank to prevent the tank fabric from being

damaged by contact with the inside of the box or container. When the tank is replaced in the original

box or container, the packing material is replaced around the tank in the same manner as received.

0031 00-2