 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-5430-239-12&P
0028 00
ASSEMBLY
1. Install new gasket (16) inside female coupling half (4). Align new flange gasket (21) and coupling half
(4) on tee (13). Install twelve screws (17), washers (18), retainer end of one chain (5), new
lockwashers (19) and nuts (20).
2. Torque screws (17) to 30 ft-lbs (40.68 Nm).
3. Position dust plug (3) in coupling half (4). Push down two cam-lever arms (15) to lock dust plug in
place.
4. Align new flange gasket (14) and coupling half (7) on tee (13). Install twelve screws (9), washers
(10), retainer end of one chain (5), new lockwashers (11) and nuts (12).
5. Torque screws (9) to 30 ft-lbs (40.68 Nm).
6. Install new gasket (8) in dust cap (2). Position dust cap (2) on coupling half (7). Push down two cam-
lever arms (6) to lock dust cap (2) in place.
7. Repeat steps four through six to install other coupling half (7) and dust cap (2).
8. Put three key rings (1) on three chains (5). Install seven key rings (1) and chains (5) on dust plug (3),
two dust caps (2) and coupling half (4).
END OF WORK PACKAGE
0028 00-3/4 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals