 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-5430-239-12&P
0026 00
5
12
11
4
13
6
10
2
9
1
8
7
3
SERVICE
WARNING
Dry cleaning solvent, A-A-59601, used to clean parts, is potentially
dangerous to personnel and property. It produces toxic and flammable
fumes. Use only in well ventilated areas. Avoid repeated and prolonged
skin contact. Do not use solvent near an open flame or near excessive
heat. The flash point of the solvent is 100F to 130F (38 C to 59 C).
CAUTION
Dry cleaning solvent, A-A-59601, used to clean parts, must not come into
contact with any part of the fuel tank fabric. Damage to the fabric will
occur.
1.
Clean all parts with dry cleaning solvent and dry thoroughly with rags.
2.
Inspect all mechanical parts for cracks, dents, breaks, and wear. Replace the component if
unserviceable.
ASSEMBLY
1.
Coat threads of female coupling (9) with thread sealing compound or anti-seize tape, and install
female coupling (9) in ball valve (7).
2.
Connect chain (12) and two key rings (13) to dust plug (10) and female coupling (9).
3.
Install new gasket (11) on dust plug (10).
4.
Push cam-lever arms (8) on female coupling (9) outward, away from body of female coupling (9).
5.
Install dust plug (10) in female coupling (9).
6.
Push cam-lever arms (8) on female coupling (9) inward toward body of female coupling (9) until
locked.
7.
Coat threads of male coupling (3) with thread sealing compound or anti-seize tape, and install male
coupling (3) in ball valve (7).
8.
Connect chain (5) and two key rings (6) to male coupling (3) and dust cap (2).
9.
Push cam-lever arms (1) on dust cap (2) outward, away from body of dust cap (2).
0026 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals