 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-5430-239-12&P
0021 00
7
1
2
8
9
3
5
4
10
6
SERVICE
WARNING
Dry cleaning solvent A-A-59601, used to clean parts, is potentially dangerous
to personnel and property. It produces toxic and flammable fumes. Use only
in well-ventilated areas. Avoid repeated and prolonged skin contact.
Do not use near an open flame or excessive heat. The flash point of solvent is
100F to 138F (38C to 59C).
1. Clean all parts with dry cleaning solvent and dry thoroughly with rags.
2. Clean o-ring groove with cleaning compound and hot water.
3. Inspect all mechanical parts for cracks, dents, breaks or wear. Replace or repair if unserviceable.
ASSEMBLY
1. Lubricate new o-ring (8) with silicone compound. Position o-ring (8) in the o-ring groove on tank
fitting.
2. Align drain fitting (3) on tank fitting (7).
3. Loosely install eight screws (4) and washers (5).
4. Insert one S-hook of chain assembly (6) under head of screw (4). Torque screws (4) to 15 ft-lbs
(20.34 Nm) using eight bolt tightening pattern.
5. Install screw (9) and other S-hook of chain assembly (6) to drain plug (10).
6. Apply sealing compound or anti-seize tape to threads of drain hose (2).
7. Engage threads of drain hose (2). Turn hose (2) clockwise until tight.
8. Engage threads of ball valve (1) and drain hose (2). Turn ball valve (1) clockwise until tight.
END OF WORK PACKAGE
0021 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals