|
| |
TM 10-5430-236-12&P
0008 00
0008 00-5
PREPARATION FOR MOVEMENT - continued
WARNINGS
Lifting or moving heavy equipment incorrectly can cause serious injury. Do not try
to lift or move more than 50 pounds (22.7kg) by yourself. Get an assistant. Bend
legs while lifting. Do not support heavy weight with your back.
Four personnel are required to fold tank. Push out trapped air through vent fitting
while folding tank.
Fold Tank
1. Remove dust cap (1) from vent fitting (2) on tank (3).
2. Working from sides of tank (3) (sides with longest length), tightly fold both sides towards center of tank
as shown. Brush off any stones, dirt, twigs or debris on tank fabric.
3. Roll tank (3) ends toward vent fitting (2). Install dust cap (1) on vent fitting (2).
4. Tie webbing (4) around tank (3).
5. Remove rolled tank (3) from berm liner (5).
1
2
|
