|
| |
TM 10-4930-248-13&P
Section II. EQUIPMENT
DESCRIPTION
1-10.
EQUIPMENT
CHARACTERISTICS,
CAPABILITIES
AND FEATURES.
a.
Characteristics.
(1)
Two-position
flow control handle.
(2)
Nozzle locks onto vehicle adapter.
(3)
Indicator shows when fuel flow has stopped.
b.
Capabilities
and Features.
(1)
Regulates fuel delivery pressure.
(2)
Built-in fuel strainer removes contaminants from fuel.
(3)
Control handle latches in closed position.
(4)
Plug and clamp type grounding cable assemblies provided.
(5)
Automatic
fuel shutoff when CCR Nozzle is disconnected
from vehicle adapter.
(6)
Dust cap and plug protect CCR Nozzle from contamination
when not in use.
This technical manual provides coverage of both types of CCR Nozzle Model Numbers 64017B. One type CCR Nozzle
contains a diaphragm
assembly and a rubber sleeve. The other type contains a piston actuator assembly and a teflon
sleeve to control fuel flow.
CCR Nozzles with serial numbers through 5794 contain a diaphragm assembly.
CCR Nozzles with serial numbers 5795 and up contain a piston assembly.
NOTE
The diaphragm related parts are no longer available for repairs. A new parts kit (Part Number KD 64017-2)
must be used to convert these diaphragm activated nozzles to a piston activated type. Stamp an "X" on the
data plate below the model number of the CCR nozzle that has been converted to the piston type. The
conversion
kit contains parts that are not required for the repair of a piston activated nozzle.
Change 1
1-3
|
