|
| |
TM 10-4930-247-13&P
2-10. ASSEMBLY AND PREPARATION FOR USE - cont.
g.
Fuel Hose Assembly. Refer to figure 2-10.
CAUTION
To prevent contamination of fuel system components, keep dirt mud, sand, and
debris from entering open couplings during assembly.
NOTES
·
This manual covers installation of all kit components. You may adjust the
number of components used and their position in the system to meet your
mission requirements.
·
Refer to para 2-10c to unroll fuel hoses and para 2-10e and 2-10f for connection
of dry break couplings.
·
The fuel hose used to connect the HTARS to the HEMTT tanker is 3-inch
diameter. All others are 2-inch diameter. All fuel hoses are the same length.
(1)
Assemble and prepare HEMTT tanker for use in accordance with TM9-2320-279-10-1.
(2)
Connect quick disconnect end of fuel hose (1) to HEMTT tanker fuel outlet (2).
(3)
Connect tee (3) to fuel hose (1).
(4)
Connect fuel hose (4) to tee (3).
(5)
Connect tee (5) to fuel hose (4).
(6)
Connect fuel hose (6) to tee (5)
(7)
Connect two fuel hoses (7 and 8) to tee (5).
(8)
Connect elbow (9) to fuel hose (8).
(9)
Connect fuel hose (10) to elbow (9).
(10)
Connect fuel hose (11) to tee (3).
(11)
Connect tee (12) to fuel hose (11).
(12)
Connect fuel hose (13) to tee (12).
(13)
Connect two fuel hoses (14 and 15) to tee (12).
(14)
Connect elbow (16) to fuel hose (15).
(15)
Connect fuel hose (17) to elbow (16).
2-27
|
