|
| |
TM 10-4930-245-13&P
5-2. CCR NOZZLE ASSEMBLY REPAIR - continued.
a.
Disassembly - continued.
(7)
On the nozzle left side, remove screw (9), one washer (10), bushing (11) and side plate (12). Remove
bushing (11) and washer (10) from screw (9). Remove second washer (10) from housing (17).
(8)
On the right side of nozzle loosen screw (9) only.
(9)
While compressing valve latch actuator (15) on right side of nozzle, remove screw (9), one washer (10),
bushing (11) and side plate (12). Remove bushing (11) and washer (10) from screw (9). Remove second
washer (10) from housing (17).
(10)
Slowly release valve latch actuator (15) and remove along with spring (16) from housing (17).
NOTE
Do not remove screw and actuating cam from side plate unless damaged and replacement is
required.
(11)
Hold the actuating cam (14) in place with a soft jaw chuck or vise and remove screw (13) from side plate.
5-3
|
