|
| |
TM 10-4930-243-13&P
5-3. GFA ASSEMBLY REPAIR-Continued
c.
Assembly-continued.
(13)
Install packing cap (16) with bevel facing down and stem packing spring (15) in body (29).
(14)
Install stem guide (14) into body (29) using stem guide tool and torque to 28-30 in lb.
NOTE
The two grooves in the valve stem are at the top of the stem.
(15)
Install one snap ring (12) on lower groove in valve stem (11).
(16)
Install the molded seal (13) with beveled end facing down. Install the second snap ring (12) above the
molded seal (13).
(17)
Install lift cap (10) and valve spring (9) in body (29).
(18)
Install preformed packing (8) on valve cap (7).
(19)
Install valve cap (7) on body (29).
5-25
|
