|
| |
TM 10-4930-242-13&P
CHAPTER 1
INTRODUCTION
Section I. GENERAL INFORMATION
1-1 SCOPE.
This manual is for use by personnel responsible for the operation and maintenance of D- 1 Pressure Nozzle
a.
Type of Manual. Operators, Unit, Direct Support, and General Support Maintenance.
b.
Equipment Model Number and Name. [Model #. D- 1] D- 1, Pressure Nozzle, Fuel
c.
Purpose of Equipment. To mate with adapters conforming to MS24484 or equivalent and permit fuel servicing in
arctic conditions.
1-2. MAINTENANCE FORMS, RECORDS AND REPORTS.
Department of the Army forms and procedures used for equipment maintenance will be those prescribed by DA Pam
738-750, The Army Maintenance Management System (TAMMS).
1-3. DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE.
Instructions for destruction of the equipment to prevent enemy use are in TM 750-244-3.
1-4. CORROSION PREVENTION AND CONTROL (CPC).
a.
Corrosion Prevention and Control of Army Materiel is a continuing concern. It is important that any corrosion
problems with this item be reported so that the problem can be corrected and improvements can be made to prevent the
problem in future items.
b.
While corrosion is typically associated with rusting of metals, it can also include deterioration of other materials,
such as rubber and plastic. Unusual cracking, softening, swelling or breaking of the materials may be a corrosion
problem.
c.
If a corrosion problem is identified, it can be reported using Standard Form 368. Product Quality Deficiency
Report. Using key words such as "rust", "deterioration", or "cracking" will insure that the information is identified as a
CPC problem. The form should be submitted to the address specified in DA Pam 738-750.
1-1
|
