|
| |
TM 10-4930-242-13&P
5-2.
D-1 FUELING NOZZLE REPAIR - continued.
(24)
Position nozzle body (47) with plugs (35) visible. Remove the top plug (35) only.
(25)
Remove two screws (36) and screw (37) through plug opening in nozzle body.
(26)
Remove nozzle shaft assembly (38) through bottom of nozzle body (47)
NOTE
Do not disassemble nut, screw and cam plate from nozzle shaft
assembly unless replacement is required.
(27)
Remove nut (39), screw (40) and cam plate (41) from nozzle shaft (38).
(28)
Remove handle assembly (42) from nozzle body (47).
(29)
Remove two screws (36) and screw (37) from handle assembly (42) to remove crank shaft (43).
(30)
Remove packing (44) and inner bearing (45) from nozzle body (47).
(31)
Remove outer bearing (46) by pushing it into nozzle body (47).
5-8
|
