|
| |
TM 10-4930-242-13&P
12-8. OPERATING PROCEDURES - continued.
b.
Nozzle Disconnection.
CAUTION
If poppet handle is not against the internal closed stop,
the linkage is not over center and internal pressure will
force the poppet in the OPEN position
(1) Rotate the poppet handle (5) to the CLOSED position until it is against the internal mechanical stop.
(2) Grasp the collar grips (3) and rotate the collar (4) to the left until it releases from the adapter.
(3) Disconnect ground cable assembly (2) from aircraft receptacle.
(4) Perform "After" checks according to Table 2-1.
(5) Install nozzle cover (1).
(6) Return nozzle to normal storage location.
2-12
|
