|
| |
TM 10-4930-241-13
2-16. ASSEMBLY AND PREPARATION FOR USE - CONT.
n.
Fuel System Fuel Tank Bypass Hose. Refer to figure 2-22.
WARNING
Do not touch surfaces with bare skin. Bare skin will freeze to metal surfaces in subzero temperatures. Always wear
arctic mittens when handling components.
CAUTIONS
•
To prevent contamination of fuel system components use care when connecting couplings to avoid getting
metal, ice, snow, dirt, sand and debris on coupling mating surfaces or in hoses during assembly.
•
To prevent leaks and ensure tight connections, make sure arctic gaskets are installed in all female quick
disconnect couplings before connecting components.
NOTES
•
This covers installation of a typical AFSSP system. You may need to adjust the number of components used, and
their position in the system, to meet your mission requirements.
•
Refer to para 2-16e for connection of quick disconnect couplings.
(1)
Connect together seven 25 foot 4-inch collapsible hoses (1).
(2)
Connect 4-inch fueling manifold (2) to output of primary 600 GPM pump (3).
(3)
Connect one end of the collapsible hoses (1) to 4-inch fueling manifold (2).
(4)
Connect the other end of the 4-inch collapsible hose (1) to 4-inch valve section (4).
(5)
Connect 4-inch valve section (4) to discharge side of fuel tank (5).
2-55
|
