|
| |
TM 10-4930-241-13
2-16. ASSEMBLY AND PREPARATION FOR USE - CONT.
1.
Fuel System Bottom Loading Point to Drum Filling Points. Refer to figure 2-20.
WARNING
Do not touch surfaces with bare skin. Bare skin will freeze to metal surfaces in subzero temperatures.
Always wear arctic mittens when handling components.
CAUTION
To prevent contamination of fuel system components use care when connecting couplings to avoid getting
metal, ice, snow, dirt, sand and debris on coupling mating surfaces or in hoses during assembly.
NOTES
•
This covers installation of a typical AFSSP system. You may need to adjust the number of components used, and
their position in the system, to meet your mission requirements.
•
Refer to para 2-16e for connection of quick disconnect couplings.
•
Off loading points can be accomplished at the refueling, drum filling or bottom loading points.
(1)
Connect a 50 foot 4-inch collapsible hose (i) to 4-inch fueling manifold (2) of bottom loading.
(2)
Connect a 25 foot 4-inch collapsible hose (3) to collapsible hose (1).
(3)
Connect 4-inch fueling manifold (4) to collapsible hose (3).
(4)
Connect a 3-inch male x 4 inch female reducer (5) to fueling manifold (4).
(5)
Connect a 25 foot 3-inch collapsible hose (6) to reducer (5).
(6)
Connect a 3-inch tank coupler (17) to collapsible hose (61.
(7)
Connect a 50 foot 4-inch collapsible hose (8) to 4-inch fueling manifold (4).
(8)
Connect 4-inch fueling manifold (9) to collapsible hose (8).
(9)
Connect a 3-inch male x 4 inch female reducer (10) to fueling manifold (9).
(10)
Connect a 25 foot 3-inch collapsible hose (11) to reducer (10).
(11)
Connect a 3-inch tank coupler (12) to collapsible hose (11).
2-51
|
