|
| |
TM 10-4930-241-13
2-1. SINGLE POINT REFUELING NOZZLE (DI) CONTROLS.
Refer to figure 2-1.
The Single Point Refueling Nozzle (D1) is supplied as an accessory item.
Locking Handles (1).
Two locking handles on the nozzle body aid positioning and connection of the nozzle to the equipment refueling
adapter. The handles are turned to the right to connect the nozzle; left to disconnect.
Control Lever (2).
The control lever has two positions, OPEN and CLOSE. When the nozzle is connected to the equipment
refueling adapter, rotating the crank handle to OPEN allows fuel flow through the nozzle. When set to CLOSE,
fuel flow is stopped. Mechanical locks prevent setting the crank handle to OPEN when the nozzle is not
connected or disconnecting the nozzle before the lever is set to CLOSE.
Refer to TM 10-4930-242-13&P for additional information, description and use of the operator's controls
and indicators on the D1 nozzle.
Figure 2-1 . Single Point Refueling Nozzle (D1) Controls .
2-3
|
