|
| |
TM 10-4930-241-13
4-12. ARCTIC FUEL AND OIL SERVICING NOZZLE REPAIR - cont.
d.
Assembly. Refer to figure 4-1.
(1)
Apply thread sealant to male threads on female coupling half (6).
(2)
Install female coupling half (6) on nozzle (7).
CAUTIONS
* To prevent premature failure of nozzle, gaskets certified for arctic service must be installed. If a new
female coupling half has been installed, remove and discard black gaskets supplied with the new
component and replace it with an arctic service gasket.
* Ensure gasket is fully seated in gasket seat of coupling/dust cap to prevent leaks in assembled
components.
(3)
Install gasket (5) in female coupling half(6).
(4)
Install dust plug (4) in female coupling half (6).
(5)
Connect chain (3) and split rings (1 and 2).
4-8
|
