|
| |
TM 10-4930-241-13
2-21. PREPARATION FOR MOVEMENT - CONT.
k.
Fuel System - 200 GPM Filter Separators to Fueling Manifold with Five Valves Removal.
Refer to figure 2-52.
WARNING
Do not touch surfaces with bare skin. Bare skin will freeze to metal surfaces in
subzero temperatures. Always wear arctic mittens when handling components.
CAUTION
To prevent contamination of fuel system components use care when
disconnecting coupling to avoid getting ice, snow, dirt, sand and debris on
coupling mating surfaces or in hoses.
NOTE
Refer to para 2-16e for disconnect of quick disconnect couplings.
(1)
Disconnect elbows (13 and 14) from fueling manifold (15) with five valves.
(2)
Disconnect elbows(13 and 14) from collapsible hoses (10, 11 and 12).
(3)
Disconnect collapsible hose (11) from fueling manifold (15) with five valves.
(4)
Disconnect a 25 foot collapsible hoses (10, 11 and 12) from reducers (7, 8 and 9).
(5)
Disconnect female reducers (7, 8 and 9) from water detection assemblies (1, 2 and 3).
(6)
Disconnect water detection assemblies (1, 2 and 3) from output of 200 GPM filter- separators (4, 5 and 6)
2-105
|
