|
| |
TM 10-4930-241-13
2-21. PREPARATION FOR MOVEMENT - CONT.
b.
200 GPM Filter-Separator Ground Rod Removal. Refer to figure 2-43.
WARNING
•
Do not touch surfaces with bare skin. Bare skin will freeze to metal surfaces in subzero
temperatures. Always wear arctic mittens when handling components.
•
Exercise care to prevent injury when removing ground rod from the soil. Wear gloves to
protect your hands.
(1) Disconnect connectors (5) of ground cable (6) from ground rod (:2) and grounding stud (7).
(2) Remove ground rod (2) from the ground by sliding hammer (4) up and down on rod.
(3) Install ground rod (2) on filter separator (3) and tighten threaded bar (1).
(4) Repeat steps (1) through (31 for remaining filter separators.
Figure 2-43. 200 GPM Filter-Separator Ground Rod Removal.
2-93
|
