|
| |
TM 10-4930-240-13
14-17. COVER ASSEMBLY (PRESSURE REDUCING) REPAIR- cont.
(21) Position plate (16) on cover assembly (3).
(22) Install four rivets (14) and backup plates (15).
(23) Position catch (13) on cover assembly (3).
(24) Install two screws (12), lockwashers (11), flat washers (10) and nuts (9).
(23) Repeat steps (23) and (24) for three remaining catches (13).
(24) Position hood fastener (8) on skid (4).
(25) Install two lockwashers (6), screws (7) and nuts (5).
(26) Repeat steps (24) and (25) for three remaining hood fasteners (8).
f. Installation. Refer to figure 4-5.
(1) Position cover assembly (3) on top of skid (4).
(2) Lift four hood fasteners (1) and latch onto catches (2).
4-21
|
