|
| |
TM 10-4930-238-12&P
1–19. DISCHARGE HOSE ASSEMBLIES. (Refer to
Discharge hose assemblies are used to dispense fuel.
Figure 1-14.)
There are two hose assemblies per unit and are stored on
a frame assembly.
Figure 1–14. Discharge Hose Assemblies.
1–20. SUCTION HOSE ASSEMBLIES. (Refer to Figure 1-15.)
Suction hoses are used between fuel drum tee fittings and pumping assembly, filter separator assembly and wye
fitting. There are six hose assemblies per unit and they are stored in a canvas container.
Figure 1–15. Suction Hose Assemblies.
1-17
|
