|
| |
TM 10-4930-229-12&P
d. Filter/Separator Assembly. (See figure 1-3.)
(1) The filter/separator assembly consists of a vessel (1) capable of filtering fuel through replaceable filter
elements at a rate of 100 gallons per minute (378.5 liters per minute).
(2) The filter/separator is connected to a common ground rod through an 8-foot ground cable (2) by a
saddle clamp (3), to the frame (4).
e.
Hoses.Fittings and Frames.
(1) Discharge hose assemblies and fittings (figure 1-4). There are two kits, a tee kit and a wye kit. Each kit
consists of the following items, except for the items noted:
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
1-6
Two discharge hose assemblies (1) 50 feet (15.25 meters) long, 2 inches (5.08 cm) in diameter, male
and female camlock end fittings with dust cap and plug.
One adapter, male to male (2), 2 inches (5.08 cm) in diameter.
One butterfly valve assembly (3), 2 inches (5.08 cm) in diameter, male and female camlock couplings
with dust cap and plug.
One elbow coupler valve (4), 2 inches (5.08 cm) in diameter, with female camlock couplings.
One nozzle assembly, closed circuit refueling nozzle (5) and a gravity fill adapter nozzle (6) (per kit).
NOTE
There are three models of closed-circuit refueling nozzles that can be used with the
FARE, as follows:
(1) Wiggins Model CCN 101/14 (see TM 5-4930-226-12&P).
(2) Aeroquip Model AE83206R (see TM 5-4930-234-13&P).
(3) Model 125-1000 (see TM 5-4930-235-13&P).
Tee fitting assembly (7) (one per FARE), 2 inches (5.08 cm) in diameter, one male and two female
camlock couplings with one dust cap and two plugs.
Coupling adapter (8) (one per FARE, in tee kit) 2-inch (5.08 cm) male by 3-inch (7.62 cm) female
camlock couplings with dust cap and plug.
Wye fitting assembly (9) (one per FARE), 2 inches (5.8 cm) in diameter, one female and two male
couplings with two dust caps and one plug.
Coupling adapter (10) (one per FARE, in wye kit), 2-inch (5.08 cm) male by 4-inch (10.16 cm) female
camlock couplings with dust cap and plug.
|
