|
| |
TM 10-4320-351-14
6.4.28 Install Flexible Coupling Adapter and Guard to Engine. (Refer to figure 6-51.)
This task consists of:
a. Installation
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Socket, Socket Wrench, 1-58 inch
Washers, Lock (Appendix I, Item 63)
(Appendix B, Section III, Item 3)
Wrench, Torque, 150 ft lb capacity
(Appendix B, Section III, Item 3)
Wrench, Combination, 1/2 inch
Equipment Condition:
(Appendix B, Section III, Item 3)
Gates, shroud and oil cooler installed (para. 6.4.27)
a.
Install splined flexible coupling adapter (1), bushing (2) and bolt (3) on PTO. Torque to 80 ft. lbs. (109.76 Nm).
b.
Install the four bolts (4), lock washers (5) and flat washers (6) to secure the flexible coupling guard (7) to the
engine.
Figure 6-51. Engine Flexible Coupling Adapter and Guard Installation
6-82
|
