|
| |
TM 10-4320-348-14
SECTION IV. UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
4.9 INTRODUCTION. Table 4-1, lists preventive maintenance checks and services which shall be performed at specified
intervals by unit maintenance personnel. It expands on preventive maintenance performed by the operator. The columns,
codes, and location designations used in the table are as follows:
a.
Be sure to perform your PMCS each time you operate your pumping assembly. Always do your PMCS in the same
order, so it gets to be a habit. Once you’ve had some practice, you’ll quickly spot anything wrong.
b.
Do your BEFORE (B) PMCS just before you operate the pumping assembly. Pay special attention to all
WARNINGs, CAUTIONs, and NOTEs.
c.
Do your DURING (D) PMCS while you are operating the pumping assembly. During operations means to monitor
the pumping assembly and its related components while it is actually being operated. Pay special attention to all
WARNINGs, CAUTIONs, and NOTEs.
d.
Do your AFTER (A) PMCS right after you have operated the pumping assembly. Pay special attention to all
WARNINGs, CAUTIONs and NOTEs.
e.
Do your WEEKLY PMCS once a week.
f.
Do your MONTHLY PMCS once a month.
g.
Use DA Form 2404 (Equipment Inspection and Maintenance Worksheet) to record any faults that you discover
before, during, or after operation unless you can fix them. You do not need to record faults that you can fix.
4.10 UNIT PMCS TABLE. For Unit PMCS information, refer to Table 4-1
4-6
|
