|
| |
TM 10-4320-348-14
(5)
Suction Hose Assembly (one each)
(6)
Nozzle Assembly (one each)
(7)
Drum Suction Stub Unloader Assembly (one each)
(8)
Suction Hose Assembly (10 feet long) (part of drum suction stub unloader assembly) (one each)
(9)
Double Male Y-Connector (one each)
(10)
Female QD Coupling (one each)
(11)
Coupling Gasket (Installed in female QD coupling) (one each)
d.
Storage Chest 2 and Related Puma Accessories (See Figure 1-4).
(1)
Storage Chest 2 Bottom (one each)
(2)
Storage Chest 2 Top (1 each)
(3)
Storage Chest 2 Information Plate (one each)
(4)
Discharge Hose Assembly (one each)
(5)
Suction Hose Assembly (two each)
(6)
Nozzle Assembly (one each)
(7)
Ground Rod With Attachments (one each)
(8)
Suction Hose Assembly (10 feet long) (part of drum suction stub unloader assembly) (one each)
(9)
Double Female Y-Connector (one each)
(10)
Male QD Reducer (one each)
1.12 EQUIPMENT DATA. Refer to Table 1-1 for general equipment data regarding the pumping assembly.
Table 1-1. Equipment Data
PUMP
Manufacturer ............................................................................................................. Carver Pump Company
Service.................................................................................................................................Flammable Liquid
Duty Cycle .....................................................................................................................................Continuous
Rated Output ...................................................................................................... 50 GPM at 100 ft. total head
Suction (Intake) Port.................................................................................................................... 1.50 in. NPT
Discharge Port............................................................................................................................. 1.50 in. NPT
Priming Method ................................................................................................. Self-priming after initial filling
Drain Port ...................................................................................................................................... 3/8 in. NPT
Rotation ................................................................................................ Counterclockwise (facing pump side)
1-9
|
