|
| |
TM 10-4320-348-14
APPENDIX F
LUBRICATION INSTRUCTIONS
LUBRICATION ORDER
LO 10-4320-348-12
PUMPING ASSEMBLY, FLAMMABLE,
BULK TRANSFER, 50 GPM, DIESEL-ENGINE-DRIVEN
MODEL 1-1/2 MP
4320-01-271-9726
Reference: TM 10-4320-348-14 and -24P
Intervals (on-condition or hard time) and the related man-
hour times am based on normal operation. The man-
hour time specified b the time you need to do all the
services prescribed for a particular interval On-condition
(OC) oil sample intervals shall be applied unless
changed by the Amy Oil Analysis Program (AOAP)
laboratory. Change the hard time interval if your
lubricants are contaminated or if you are operating the
equipment under adverse operating conditions, including
longer-than-usual operating hours. The hard time
interval may be extended during periods of low activity. If
extended, adequate preservation precautions must be
taken. Hard time intervals will be applied in the event
AOAP laboratory support is not available.
Clean parts with dry cleaning solvent conforming to P-D-
680, SD-2. Dry before lubricating. Dotted arrow
FOLD
points
indicate
lubrication
on
both
sides
of
the
equipment.
The lowest level of maintenance authorized to lubricate a
point is indicated by one of the following symbols as
appropriate: Operator/crew (C) and Unit Maintenance
(O).
Reporting errors and recommending Improvements.
You can help improve this manual If you find any
mistakes or if you know of a way to improve the
procedure, please let us know. Mail your letter or DA
Form 2028 (Recommended Changes to Publications and
Blank Forms) direct to: Commander, U.S. Army Troop
Support
Command,
ATTN:
AMSTR-MCTS,
4300
Goodfellow Boulevard, St. Louis, MO 631201798. A
reply will be furnished to you.
FOLD
TOTAL MAN-HR
TOTAL MAN-HR
INTERVAL
MAN-HR
INTERVAL
MAN-HR
D
0.1
100
0.5
F-1
|
