|
| |
TM 10-4320-347-13&P
4.7. SLAVE CABLE REPAIR AND REPLACEMENT - (Continued.)
Figure 4-5. Slave Cable Repair.
CAUTION
Improper installation of wiring can damage the pump or cause the pumping
assembly to fail to operate. Be sure to properly connect the positive and negative
wires or pump will rotate in wrong direction and will not pump fluid.
NOTE
Wires must be traced to receptacle to determine which wire is positive or negative.
(4) Twist black motor wire lead (6) together with ( - ) negative lead of slave cable wire (8). Install
wire nut (5).
(5) Twist red motor wire lead (6) together with ( + ) positive lead of slave cable wire (8). Install
wire nut (5).
(6) Stuff wiring into junction box and install junction box cover (3), four bolts (1), and four washers
(2) onto junction box (4).
4-10
|
