|
| |
TM 10-4320-347-13&P
TABLE 2-1. Operator Preventive Maintenance Checks and Services
for 35 GPM Pump Assembly.
Location
Item
Interval
Item To
Procedure
Not Fully Mission
No
Check/Service
Capable If:
10
Suction Hose Assemblies.
During
Couplings
Inspect hose assemblies for
Hose assembly leaks.
leaks.
11
Discharge Hose Assemblies.
During
Couplings
Inspect hose assemblies for
Hose assembly leaks.
leaks.
12
Nozzle Assembly.
During
Couplings
Inspect nozzle assembly for
Nozzle assembly leaks.
Ieaks.
During
Spout
Check that fuel is discharging
Fuel is not discharging or
and that spout is not clogged.
spout is clogged.
13
Pump Assembly.
During
Pump
Inspect mating surfaces
Leak found between
between pump and motor for
pump and motor.
evidence of leaks.
14
Motor Assembly.
During
Motor
Check motor for signs of
Motor is over heating.
over heating. Listen for
Motor makes noise
noises from motor which may
indicating defective
indicate defective bearings.
bearings.
15
Slave Cable.
During
Wire
Check cable for over heating.
Cable is overheating.
Inspect cable for distortion.
2-9
|
