|
| |
TM 10-4320-343-14
5.8.1 Removal.
To prevent rolling or sliding, do not work on equipment that is
not securely stabilized.
Ensure both wheels are secure.
Failure to obey this warnings may result in serious personal
i n j u r y .
a.
Raise unit clear of ground and adequately support with jack stands.
b.
Adequately support axle assembly to prevent it from dropping when attaching
hardware is removed.
Do not remove bolts securing top bracket to base bracket.
C o i l
springs are under high tension.
Failure to obey this warnings
may result in serious personal injury.
c .
Remove four nuts (figure 5-17, 1) lockwashers (2), washers (3), bolts (4),
washers (5) and beveled washers (6).
d .
Axle assembly (7) is now free from frame.
Remove axle assembly (7) from
supports and move free of frame.
5.10.2.2 Installation.
a .
With frame positioned on assembly stand, raise axle assembly (7) into position
under frame.
b .
Install beveled washers (6), washers (5), bolts (4), washers (3),
lockwashers (2), and nuts (1).
5-48
|
