|
| |
TM 10-4320-343-14
4.10.8.1 Removal.
To prevent rolling or sliding, do not work on equipment that is
not securely stabilized.
Ensure both wheels are secure.
Failure to obey this warning may result in serious personal
i n j u r y.
a .
Apply pressure to idler pulley (figure 4-12, 1) and push upward.
b .
Remove V-belt (2) while holding idler pulley (1).
c .
Slowly release pressure from idler pulley (1).
4.10.8.2 Installation.
a .
Install cooling fan V-belt (2) on inner groove of crankshaft pulley (3) and
cooling fan pulley (4), then apply pressure to idler pulley (1) and push
upward.
b .
While holding idler pulley (1), install cooling fan V-belt (2) on idler
p u l l e y ( 1 ).
c .
Release idler pulley (1).
Ensure cooling fan V-belt is on cooling fan
p u l l e y ( 4 ), idler pulley (1), and inner groove crankshaft pulley (3).
4-31
|
