|
| |
TM 10-4320-343-14
4.10.2.1 Removal.
WARNING
To prevent rolling or sliding, do not work on equipment that is not securely
stabilizes. Ensure both wheels are chocked.
Failure to obey these warnings could result in serious injury.
a.
Disconnect hose (1) from pump.
b.
Pull handle of pump out and remove knob (2).
c.
Remove nut (3) from threads (4).
d.
Remove pump (5) from bracket.
4.10.2.2 Installation.
a.
Position pump (5) in bracket so that hose connection is pointing down.
b.
Thread nut (3) on threads (4) and tighten.
c.
Pull out pump shaft and thread knob (2) on end of pump shaft.
d.
Connect tube (1) to pump.
Change 1 4-19
|
