|
| |
TM 10-4320-342-24
4-4. STARTER-GENERATOR REPAIR- continued.
Refer to Figure 4-10.
(13)
Inspect terminal board (1) as follows:
(a)
Inspect for cracks, and loose or damaged studs (2) on terminal board (1). Replace if defective.
(b)
Check for burned or damaged insulation (3) on terminal board (1) between terminals. Replace if defective.
Figure 4-10. Terminal Board Inspection
Refer to Figure 4-11.
(12)
Inspect armature (1) as follows:
(a)
Inspect for worn, pitted or burned commutator bars (2). Refinish commutator.
(b)
Inspect for damage to windings (3), retainer bands (4) or shaft (5).
(c)
Inspect for worn, pitted or burned bearing journals (6). Replace armature.
Figure 4-11. Armature Inspection
4-14
|
