|
| |
TM 10-4320-342-24
3-29. BATTERY HEATER ASSEMBLY REPAIR - continued.
b.
REPAIR.
Replace all damaged components.
c.
INSTALLATION.
(1)
Install grommet (7) in adapter plate (6).
(2)
Slide adapter plate (6) over wire leads (2).
(3)
Strip insulation from wire lead (2) to the length of socket (8) on contact (3).
(4)
Insert stripped end of wire lead (2) in contact (3) and solder.
(5)
Install contact (2) into insert (4) on electrical connector (5).
(6)
Repeat steps 3, 4 and 5 for installation of remaining wire leads (2).
(7)
Install tie straps (1) on wire leads (2). Space tie straps approximately 1 inch apart.
Figure 3-49. Battery Heater Assembly Repair
3-106
|
