|
| |
TM 10-4320-342-24
3-26. ENGINE MOTION TRANSDUCER REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
200/600 Pump Assembly removed from system
Item 1)
(Para 2-9, TM 10-4320-342-10)
Vernier Caliper (App B, Sect III, Item 3)
General Safety Instructions
Materials/Parts
WARNING
Antiseize Compound (App E, Item 7)
Chemical agent resistance coating (CARC) Lockwire
(App E, Item 15)
produces toxic fumes when flame is applied. It is
Lubricating Oil (App E, Item 18)
necessary to remove CARC in areas where flame
Preformed Packing (App F, Item 96)
is to be applied.
Shim (App F, Item 95)
a.
REMOVAL. Refer to Figure 3-46.
(1)
Open door (1).
(2)
Cut lockwire from connector (2) and engine motion transducer (3).
(3)
Disconnect electrical connector (2) from engine motion transducer (3).
(4)
Remove bolts (4) and flatwashers (5).
(5)
Remove engine motion transducer (3) from gearbox assembly (6).
(6)
Remove preformed packing (7) from engine motion transducer (3). Discard preformed packing.
NOTE
Measure thickness of shim to aid in installation of shim.
(7)
Remove shim (8) from engine motion transducer (3). Discard shim.
3-99
|
