|
| |
TM 10-4320-342-24
3-24. ENGINE WIRING HARNESS W1 REPLACEMENT - continued.
Refer to Figure 3-42.
(12)
Remove safety wire and disconnect electrical connector (1) from electrical connector (2) on lower fuel control
cover (3).
(13)
Remove safety wire and electrical connector (4) from oil temperature bulb (5).
(14)
Remove bolts (6) and clamps (7) from engine assembly (8).
(15)
Remove safety wire and disconnect electrical connector (9) from oil pressure switch (10).
(16)
Remove engine wiring harness W1 (11) from engine assembly (8).
Figure 3-42. Engine Wiring Harness W1 (OIL PRESSURE SWITCH, OIL TEMPERATURE BULB, LOWER FUEL
CONTROL COVER) Removal
3-94
|
