|
| |
TM 10-4320-342-24
3-21. SPEED REDUCER REPAIR - continued.
(10)
Install retaining ring (14) and press bearing (17), spacer (16) and bearing (15) into adapter housing (4).
(11)
Press shaft (12) and race (13) into adapter housing (4) and install retaining ring (11).
(12)
Apply a light coat of sealant to-mating surfaces of adapter housing (4) and case (5).
CAUTION
To prevent premature failure of speed reducer, oil ports between adapter housing
and case must be aligned correctly.
(13)
Position adapter housing (4) on case (5). Verify that the oil ports on adapter housing and case are aligned and
shafts (12 and 24) mesh correctly.
(14)
Install twelve screws (6) in adapter housing (4).
(15)
Install plug (10) in adapter housing (4).
(16)
Install seal housing (8), seal (9) and eight screws (7) on adapter housing (4).
(17)
Install elbow (3), tee (2) and tube assembly (1) on case (5).
3-72
|
