|
| |
TM 10-4320-342-24
2-62. BATTERY ELECTRICAL CONNECTOR REPLACEMENT. I
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
200/600 GPM pump assembly shut down
Item 1)
(Para 2-7c, TM 10-4320-342-10)
Material/Parts
Tags (App E, Item 16)
a. REMOVAL. Refer to Figure 2-89.
(1)
Open door (1).
(2)
Disconnect battery electrical connector (2) from battery (3).
(3)
Remove screws (4), flatwashers (5) and nuts (6).
(4)
Remove top battery electrical connector (7).
(5)
Tag all wires and note markings on bottom battery electrical connector (11).
(6)
Remove nuts (8), lockwashers (9) and lugs (10) from bottom battery electrical connector (11).
b. INSTALLATION.
CAUTION
Damage to the equipment could occur if polarity is reversed.
NOTE
Wire numbers are stamped on each electrical wire. This information, in
conjunction with data on FO-1 and FO-2, 200/600 GPM Pump Wiring Diagram, may
be used to connect wires if tags are lost or illegible.
(1)
Install lugs (10), lockwashers (9) and nuts (8) on bottom battery electrical connector (11).
(2)
Install top battery electrical connector (7) with screws (4), flatwashers (5) and nuts (6).
(3)
Connect battery electrical connector (2) on battery (3).
(4)
Close door (1).
2-210
|
