|
| |
TM 10-4320-342-24
2-59.
ENGINE OIL PRESSURE SWITCH REPLACEMENT.
This Task Covers
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
Starter-Generator removed (Para 2-45)
Item 1)
Torque Wrench: 0-200 inch-pounds (App B,
Sect III, Item 2)
Material/Parts
Safety Wire (App E, Item 15)
Preformed Packing (App F, Item 6)
Lubricating Oil (App E, Item 20)
a. REMOVAL. Refer to Figure 2-86.
(1)
Remove safety wire and disconnect connector (1) from engine oil pressure switch (2).
(2)
Remove engine oil pressure switch (2) from engine (4).
(3)
Remove preformed packing (3) from engine (4). Discard preformed packing.
b. INSTALLATION.
(1)
Lubricate performed packing (3).
(2)
Position preformed packing (3) on engine oil pressure switch (2).
(3)
Install engine oil pressure switch (2) on engine (4). Torque to 65 inch-pounds and safety wire.
(4)
Install connector (1) on oil pressure switch (2) and secure with safety wire.
2-203
|
