|
| |
TM 10-4320-342-24
2-47. ENGINE FUEL CONTROL UPPER COVER AND FUEL FILTER REPLACEMENT - continued.
b. INSTALLATION. Refer to Figure 2-74.
(1)
Lubricate packing (9) inside of fuel filter (7).
(2)
Lubricate packing (10) and install on fuel filter cover (6).
(3)
Place fuel filter (7) in fuel filter cover (6) with packing end out.
(4)
Align fuel filter (7) and install fuel filter cover (6) on fuel control assembly (8). Rotate fuel filter cover (6)
approximately one-eighth turn onto bolts (5).
CAUTION
To prevent breaking fuel filter cover ears, be sure fuel filter cover is fully seated
prior to tightening bolts.
(5)
Secure fuel filter cover (6) to fuel control assembly (8) with bolts (5). Torque bolts to 37 to 43 inch-pounds.
(6)
Install fuel control upper cover (4) and secure with bolts (2) and flatwashers (3). Torque bolts to 37 to 43 inch-
pounds.
(7)
Close door (1).
2-178
|
