|
| |
TM 10-4320-342-24
2-47. ENGINE FUEL CONTROL UPPER COVER AND FUEL FILTER REPLACEMENT.
This Task Covers
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
200/600 GPM pump removed from system
Item 1)
(Para 2-9, TM 10-4320-342-10)
Torque Wrench 0-200 inch-pounds (App B,
Sect III, Item 2)
General Safety Instructions
WARNING
Material/Parts
Fuel and fuel vapors are toxic and flammable. Be
Fuel Filter Assembly (App F, Item 101)
careful when working around fuel so not to come in
Preformed Packing (App F, Items 102 and 103)
contact. Fuel can cause injury to personnel. For
Rags (App E, Item 2)
disposal of contaminated fuel refer to FM 10-20.
Lubricant (App E, Item 18)
a. REMOVAL. Refer to Figure 2-74.
(1)
Open door (1).
(2)
Remove bolts (2), flatwashers (3) and upper fuel control cover (4).
WARNING
The fuel filter cover will contain fuel. To prevent fire hazards, be sure no sparks or
open flame within 50 feet.
(3)
Loosen bolts (5) (do not remove) and rotate fuel filter cover (6) approximately one-eighth turn and pull fuel filter
cover (6) off.
(4)
Using thumb and forefinger, pull fuel filter (7) out of fuel control assembly (8).
(5)
Remove preformed packing (9) from fuel filter (7). Discard preformed packing and fuel filter.
(6)
Remove preformed packing (10) from fuel filter cover (6). Discard preformed packing.
(7)
Clean filter cover (6) with lint free rags.
2-176
|
