|
| |
TM 10-4320-342-24
2-42. OIL FILTER SERVICING AND REPAIR.
This task covers:
a. Servicing
b. Removal
c. Disassembly
d. Assembly
e. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
200/600 GPM pump assembly removed from
Item 1)
system (Para 2-9, TM 10-4320-342-10)
Socket 1-1/2 inch (App B, Sect III, Item 2)
General Safety Instructions
Material/Parts
NOTE
Preformed Packing (App F, Item 13, 14, 15)
For disposal of contaminated oil, refer to FM 10-20.
Filter (App F, Item 7)
Lubricating Oil (LO 10-4320-342-12)
a. SERVICING. Refer to Figure 2-67.
(1)
Open doors (1 and 2).
(2)
Remove bowl (3).
(3)
Remove filter (4) and preformed packing (5). Discard preformed packing and filter.
(4)
Remove preformed packing (6) from housing (7). Discard preformed packing (6).
(5)
Install preformed packing (6) on housing (7).
(6)
Install preformed packing (5) on filter (4).
(7)
Install filter (4) in housing (7).
(8)
Rinse, prime and install bowl (3) on housing (7).
b. REMOVAL.
(1)
Open doors (1 and 2).
(2)
Disconnect tubes (8 and 9) from elbows (10 and 11).
(3)
Support filter assembly (12) and remove nuts (13), washers (14), bolts (15) and remove filter from bracket (16).
2-160
|
