|
| |
TM 10-4320-342-24
2-37. FUEL FILTER SERVICING AND REPAIR - continued.
c. DISASSEMBLY. Refer to Figure 2-62.
(1)
Remove adapters (10) from housing (7).
(2)
Remove preformed packing (15) from housing (7). Discard preformed packing.
d. REPAIR.
Repair is limited to replacement of defective components.
e. ASSEMBLY.
(1)
Install preformed packing (15) on adapters (10).
(2)
Install adapters (10) in housing (7).
f. INSTALLATION.
(1)
Position filter assembly (11) on bracket (16) and install bolts (14), washers (13)and nuts (12).
(2)
Connect tubes (8 and 9) to adapters (10).
(3)
When installing filter assembly (11), prime the bowl (3).
(4)
Install panel (1).
(5)
Close door (2).
2-150
|
