|
| |
TM 10-4320-342-24
2-25. FEMALE FLANGE ADAPTER REPLACEMENT - continued.
(5)
Remove split rings (14) and chain (15) from dust plug (16) and female flange adapter (4).
(6)
Remove dust plug (16) and gasket (17) from female flange adapter (4).
b.
INSTALLATION.
(1)
Install gasket (17) and dust plug (16) in female flange adapter (4).
(2)
Connect split rings (14) to chain (15), dust plug (16) and female flange adapter (4).
NOTE
Elbow (11) and adapter (12) are used only on the 200 GPM pump. These are
replaced with a swivel elbow on the 600 GPM pump.
(3)
Lubricate and install preformed packing (13), adapter (12) and elbow (11) in female flange adapter (4).
NOTE
A swivel elbow is used only on the 600 GPM pump.
(4)
Lubricate and install preformed packing (10), adapter (9) and swivel elbow (8) in female flange adapter (4).
(5)
Position screen (6) into female flange adapter (4).
(6)
Lubricate and install new packing (7) on female flange adapter (4).
(7)
Position female flange adapter (4) on pump and clutch assembly (5) and install bolts (3), flatwashers (2) and
locknuts (1). Torque 297 to 327 foot-pounds.
2-119
|
