|
| |
TM 10-4320-342-24
2-17. NONMETALLIC HOSE REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
200/600 GPM Pump Assembly removed from
Item 1)
system (Para 2-9, TM 10-4320-342-10)
a.
REMOVAL. Refer to Figure 2-37.
NOTE
This procedure covers the nonmetallic hose. Replacement of other hoses is
similar.
(1)
Unscrew swivel nuts (1 and 2) and remove hose (3).
(2)
Unscrew swivel nuts (4 and 5) and remove hose (6).
(3)
Unscrew swivel nuts (7 and 8) and remove hose (9).
(4)
Unscrew swivel nuts (10 and 11) and remove hose (12).
b.
INSTALLATION.
NOTE
This procedure covers the replacement of tube assembly connected between fuel
pump assembly and bulkhead fitting. Other tube assemblies are replaced in a
similar manner.
(1)
Install hose (12) and tighten swivel nuts (10 and 11).
(2)
Install hose (9) and tighten swivel nuts (7 and 8).
(3)
Install hose (6) and tighten swivel nuts (4 and 5).
(4)
Install hose (3) and tighten swivel nuts (1 and 2).
2-102
|
