|
| |
TM 10-4320-342-24
2-16. OIL RESERVOIR AND TUBES REPAIR.
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
Drain Tank Removed (Para 2-15)
Item 1)
Oil drained from Reservoir (Note 3b,
LO 10-4320-342-12)
Material/Parts
Antiseize Tape (App E, Item 6)
a.
REMOVAL. Refer to Figure 2-36.
(1)
Disconnect and remove tubes (1, 2 and 3).
(2)
Remove bolts (4), flatwashers (5), one nut (6) and oil reservoir (7).
(3)
Remove cap (8) from oil reservoir (7).
(4)
Remove swivel elbows (9 and 10) from oil reservoir (7).
(5)
Remove oil level indicator (11) from oil reservoir (7).
b.
REPAIR.
Repair limited to replacement of damaged components.
c.
INSTALLATION.
(1)
Install oil level indicator (11) in oil reservoir (7).
NOTE
Install antiseizing tape (teflon tape) on all male pipe threads and wrap tape in
direction of threads. Do not allow tape to extend beyond end of threads.
(2)
Install swivel elbows (9 and 10) on oil reservoir (7).
(3)
Install cap (8) on oil reservoir (7).
(4)
Position oil reservoir (7) and install bolts (4), flatwashers (5) and nut (6).
(5)
Install tubes (1, 2 and 3).
2-100
|
