|
| |
TM10-4320-324-14
6-8. Rocker Arm Assembly Repair.
This task covers:
a.
Disassembly
c. Assembly
b.
Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP:
Tools
Equipment Condition
Tool set, general mechanics, item 35,
Cylinder head cover removed (para 5-22).
section III, appendix B
Torque wrench, item 34, section III, appendix B
General Safety Instructions
Wear personal protective equipment when using
Materials/Parts
cleaning solvent or compressed air for cleaning
Bushing - 223 0851
purposes.
Thrust Pad - 213 9600
Bushing - 337 1866
Solvent, dry cleaning, item 15, appendix E
Cloth, lint-free, item 3, appendix E
a. Disassembly.
(1) Remove two nuts (1), flat washers (2), and rocker arms (3).
(2) Remove two bushings (4) and press bushing (5) out of rocker arms (3).
(3) Remove two locknuts (6) and studs (7).
(4) Remove two thrust pads (8), nuts (9), and oil nozzles (10).
(5) Remove two studs (11) from rocker bracket (12).
6-33
|
