|
| |
TM 10-4320-324-14
6-7. Engine Assembly Repair (CONT).
(26) Install bushing (71) and journal (70).
(27) Install bushing (69) in idler gear (66).
(28) Install seal (68) and tube (67) in bracket (65).
(29) Install bracket (65) on capscrew (64).
(30) Install idler gear (66) using capscrew (64) with bracket (65) and match marks. Preload capscrew (64)to 22 lb-ft
(30 Nm). Stage 1 angle is 45°. Total is 45°.
(31) Install cover (73) using flat washer (75) and screw (74). Cover may need a pressing device.
(32) Install dipstick (72).
6-28
|
