|
| |
TM 10-4320-324-14
Section II. MAINTENANCE PROCEDURES
6-7. Engine Assembly Repair.
This task covers:
a.
Disassembly
c.
Assembly
b.
Cleaning/Inspection
d.
Follow-on Maintenance
INITIAL SETUP:
Tools
Equipment Condition
Depth gauge, item 34, section III, appendix B
Engine removed (para 5-17).
Micrometer, item 34, section III, appendix B
Starter assembly removed (para 4-36).
Dial gauge, item 2, section III, appendix B
Alternator assembly removed (para 4-35).
Retainer, item 36, section III, appendix B
Fuel lines, hoses and fittings removed
Press-in device, item 37, section III, appendix B
(para 4-41).
Tool kit, general mechanic's, item 35, section III,
Idler pulley assembly removed (para 4-51).
appendix B
Injection pump removed (para 5-14).
Cylinder head removed (para 5-22).
Materials/Parts
Lockwasher - 110 2800
General Safety Instructions
Lockwasher - 110 2799
Some springs are under tension and can act as
Lockwasher - 110 2802
projectiles when tension is released. Injury to
Lockwasher (2) - 111 7863
personnel can result.
Lockwasher (2) - 110 2799
Grease, automotive and artillery, item 5,
Wear personal protective equipment when
appendix E
cleaning components with cleaning solvent
Oil, lubricating, item 8, appendix E
and compressed air.
Adhesive, silicone sealant, item 2, appendix E
Solvent, dry cleaning, PD-680, item 15,
appendix E
Cloth, lint-free, item 3, appendix E
a. Disassembly.
(1) Ensure engine oil has been drained.
(2) Place engine assembly in swiveling mounting stand.
(3) Install retainer (1) on V-belt pulley and socket on nut.
6-8
|
