|
| |
TM 10-4320-324-14
5-24. Pump Assembly Repair (CONT).
(17) Lubricate base and seat of seal plate (9) with lubricating oil.
CAUTION
Ensure that seal back face seats in bottom of base, otherwise seal will leak and damage unit. Also ensure
that seal does not fall out of place on seal rotating assembly. Damage to unit can result.
(18) Install seal plate (9) with eight lockwashers (8) and eight nuts (7). Tighten nuts to 21 lb-ft (28 N.m).
(19) Lubricate outer surface of shaft sleeve (11) and inner base of seal rotating assembly (10) with
lubricating oil.
(20) Install shaft sleeve (11) into seal rotating assembly (10).
(21) Install seal rotating assembly (10) onto shaft (29).
(22) Install spring (6) and spring seat (5).
NOTE
Install same quantity and thickness of shims as recorded during removal.
(23) Install shims (4).
5-88
|
