|
| |
TM 10-4320-324-14
5-18. Intake and Exhaust Manifolds Replacement (CONT).
a.
Removal.
(1)
Remove two screws (1), two washers (2), muffler support bracket (4), and eight flat washers (3).
(2)
Remove 14 nuts (5), 14 lockwashers (6), 14 flat washers (7), 14 screws (8), 14 flat washers (7), and cooling
air duct (9).
(3)
Remove clamp (10) and tube extension (11).
(4)
Remove four washers (12), four lockwashers (13), and four screws (14).
(5)
Remove screw (17), lockwasher (16), and washer (15).
(6)
Remove screw (18), lockwasher (19), washer (20), and air duct wall (21).
(7)
Remove rubber grommet (22).
(8)
Remove two screws (23) and cover (24).
5-56
|
